manualshive.com logo in svg

Asus Crosshair V Formula Series, User Manual, Page: 49 / 193

Share
Download
Asus Crosshair V Formula Series User Manual Download Page 49

AMD

2.2.8.

Internal.connectors

1.. AMD SB950 Serial ATA connectors (7-pin SATA6G_1-6)

AMD.SB950.Serial.ATA.connectors.(7-pin.SATA6G_1-6)

These connectors are for the Serial ATA signal cables for Serial ATA hard disk 

drives and optical disc drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, 

and 10 configuration with the onboard AMD

®

 SB950 RAID controllers.

•  These connectors are set to AHCI mode by default. In AHCI mode, you 

can connect Serial ATA boot/data hard disk drives to these connectors. 

If you intend to create a Serial ATA RAID set using these connectors, set 

the 

SATA.Port1-4

 item in the BIOS to [RAID]. See section 

3.5.3.Storage.

Configuration

 for details.

•  Before creating a RAID set, refer to section 

4.4 RAID configurations

 or the 

manual bundled in the motherboard support DVD.

•  You must install Windows

®

 XP Service Pack 2 or later versions before using 

Serial ATA hard disk drives. The Serial ATA RAID feature is available only if 

you are using Windows

®

 XP SP2 or later versions.

•  When using hot-plug and NCQ, set the 

SATA.Port1-4

 in the BIOS to [AHCI]. 

See section 

3.5.3 Storage Configuration

 for details.

ROG Crosshair V Formula

2-19

Summary of Contents for Crosshair V Formula Series


































































































































































































Reviews:

No comments