manualshive.com logo in svg

Asus Crosshair V Formula Series, User Manual, Page: 108 / 193

Share
Download
Asus Crosshair V Formula Series User Manual Download Page 108

3-24

Chapter 3: BIOS setup

Asmedia.USB.3.0.Battery.Charging.Support.[Disabled]

[Enabled] 

Enables the Asmedia USB 3.0 Battery Charging Support fuction.

[Disabled] 

Disables the fuction.

Intel.82583.LAN.[Enabled]

[Enabled] 

Enables the Intel 82583 LAN controller.

[Disabled] 

Disables the controller.

Launch.PXE.OPROM.[Disabled]

This item appears only when you set the previous item to [Enabled] and allows you 

to enable or disable boot option for Legacy Network Devices. 

Configuration options: [Enabled] [Disabled]

SB HD Azalia Configuration

HD.Audio.Azalia.Device.[Enabled]

[Enabled] 

Enables the HD Audio Device.

[Disabled] 

Disables the controller.

Azalia.Front.Panel.[HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or 

high-definition audio depending on the audio standard that the front panel audio 

module supports.
[AC97] 

Sets the front panel audio connector (AAFP) mode to legacy AC’97

[HD] 

Sets the front panel audio connector (AAFP) mode to high 

definition audio.

SPDIF.Out.Type.[SPDIF]

[SPDIF] 

Sets to [SPDIF] for SPDIF audio output.

[HDMI] 

Sets to [HDMI] for HDMI audio output.

Summary of Contents for Crosshair V Formula Series


































































































































































































Reviews:

No comments