manualshive.com logo in svg

Asus Crosshair V Formula Series, User Manual, Page: 31 / 193

Share
Download
Asus Crosshair V Formula Series User Manual Download Page 31

2.1 

Before you proceed

Take note of the following precautions before you install motherboard components 

or change any motherboard settings.

•  Unplug the power cord from the wall socket before touching any 

component.

•  Before handling components, use a grounded wrist strap or touch a safely 

grounded object or a metal object, such as the power supply case, to avoid 

damaging them due to static electricity.

•  Hold components by the edges to avoid touching the ICs on them.
•  Whenever you uninstall any component, place it on a grounded antistatic 

pad or in the bag that came with the component.

•  Before you install or remove any component, ensure that the ATX power 

supply is switched off or the power cord is detached from the power 

supply. Failure to do so may cause severe damage to the motherboard, 

peripherals, or components.

ROG Crosshair V Formula

2-1

Summary of Contents for Crosshair V Formula Series


































































































































































































Reviews:

No comments