Asus Crosshair V Formula Series User Manual Download Page 150

Page: 150 / 193

4-16

Chapter 4: Software support

• The actual performance boost may vary depending on your CPU

specification.

• Do not remove the thermal module. The thermal conditions should be

monitored.

CPU/NB.Load-line.Calibration

Load-line is defined by Intel VRM spec

and affects CPU/NB voltage. The

CPU/NB working voltage will decrease

proportionally to CPU/NB loading.

Higher load-line calibration could get

higher voltage and good overclocking

performance but increase the CPU/NB

and VRM thermal.

•  Regular: 0%
•  High: 50%
•  Extreme: 100%

CPU/NB.Current.Capability

CPU/NB Current Capability provides

wider total power range for overclocking.

A higher value setting gets higher VRM

power consumption delivery.
A higher value brings a wider total power

range and extends the overclocking

frequency range simultaneously.

Suggestion: choose higher value when overclocking or under high CPU loading

for extra power support.

Summary of Contents for Crosshair V Formula Series


































































































































































































Search results

Summary of Contents for Crosshair V Formula Series

Reviews:

Asus Crosshair V Formula Series, User Manual, Page: 150 / 193

Search results

Summary of Contents for Crosshair V Formula Series

Reviews: