manualshive.com logo in svg

Asus Crosshair V Formula Series, User Manual, Page: 145 / 193

Share
Download
Asus Crosshair V Formula Series User Manual Download Page 145

ROG Crosshair V Formula

4-11

CPU.Ratio

Applies.all.changes.

immediately
Undoes.all.changes.

without.applying

Click.to.restore.

all.start-up.

settings

Adjustment bar

•  Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU 

Ratio function in TurboV. Refer to Chapter 3 of your motherboard user 

manual for details.

•  The CPU Ratio bars show the status of the CPU cores, which vary with 

your CPU model.

Auto.Tuning

ASUS TurboV EVO includes two auto tuning modes, providing the most flexible 

auto-tuning options.

•  The overclocking result varies with the CPU model and the system 

configuration.

•  To prevent overheating from damaging the motherboard, a better thermal 

environment is strongly recommended.

•  Fast Tuning: fast CPU overclocking
•  Extreme Tuning: extreme 

overclocking for CPU and memory

Using Fast Tuning
1.  Click the 

Auto.Tuning

 tab 

and then click 

Fast

. 

2.  Read through the warning 

messages and click 

OK

 to 

start auto-overclocking.

Summary of Contents for Crosshair V Formula Series


































































































































































































Reviews:

No comments