ASTRO ATS-309, Operator'S Manual

Page: 42 / 100

PROGRAMMING THE TABBER
38
Manual Tab/Stamp Positioning Features
Pressing Manual soft key from
“
Select
Setup Option
”
screen puts Tabber into
“
manual positioning mode
”
. In this mode,
the operator must manually set offset value
(
position
) for each tab/stamp being applied.
From
“
Select Tabber Head
”
screen, select
Head you want to set up.
Selecting
Head #1 provides following options:
Tab/Stamp
–
Use to place tabs on the side
of the media or apply stamps with Head #1.
Front Tab
–
Use to apply a tab to front
(
leading edge
) of media with Head #1
(
End Tabbing
).
NOTE: Selecting Front Tab presents you
with options allowing you to set tab Pitch and
adjust fold position for Front Tab.
None
–
Select if you do not want to use Head #1 (
Disables Head #1
).
BACK
–
Returns to previous screen.
Selecting Head #2 provides following choices:
Side Tab
–
Select to place tabs on side
of media.
None
–
Select if you do not want to use
Head #2 (
Disables Head #2
).
BACK
–
Returns to previous screen.