2. Do not place propane/LP supply tank(s) inside any structure.
Locate propane/LP supply tank(s) outdoors (propane/LP only).
3. If you smell gas
• shut off gas supply
• do not try to light any appliance
• do not touch any electrical switch; do not use any phone in
your building
• leave the building immediately
• immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions
• if you cannot reach your gas supplier, call the fi re department
4. This fi replace shall not be installed in a bedroom or bathroom.
5. Do not use this fi replace as a wood-burning fi replace. Use only
the logs provided with the fi replace.
6. Do not add extra logs or ornaments such as pine cones, vermicu-
lite, or glowing embers (rockwool). Using these added items can
cause sooting. Do not add volcanic stone around base. Volcanic
stone and debris could fall into the control area of fi replace.
7. This fi replace is designed to be smokeless. If logs ever appear
to smoke, turn off fi replace and call a qualifi ed service person.
NOTE
: During initial operation, slight smoking could occur due
to log curing and fi replace burning manufacturing residues.
8. To prevent the creation of soot, follow the instructions in Clean-
ing and Maintenance,
Page 31
.
9. Before using furniture polish, wax, carpet cleaner, or similar
products, turn heater off. If heated, the vapors from these
products may create a white powder residue within burner box
or on adjacent walls or furniture.
10. This fi replace needs fresh air ventilation to run properly. This
fi replace has an Oxygen Depletion Sensing (ODS) safety shutoff
system. The ODS shuts down the fi replace if not enough fresh
air is available. See Air for Combustion and Ventilation,
Page 6
.
If fi replace keeps shutting off, see Troubleshooting,
Page 34
.
11. Do not run fi replace
• where fl ammable liquids or vapors are used or stored.
• under dusty conditions.
12. Do not use this fi replace to cook food or burn paper or other
objects. Never place any objects in the fi replace or on logs.
13. Do not use this room heater if any part has been under water.
Immediately call a qualifi ed service technician to inspect the
room heater and to replace any part of the control system and
any gas control which has been under water.
14. Do not operate fi replace if any log is broken. Do not operate
fi replace if a log is chipped (dime-sized or larger).
15. Turn off and unplug fi replace and let cool before servicing. Only
a qualifi ed service person should service and repair fi replace.
1. WARNING: This appliance is only for use with the type of gas
indicated on the rating plate. This appliance is not convert-
ible for use with other gases.
SAFETY
Continued
16. Operating fi replace above elevations of 4,500 feet could cause
pilot outage.
17. To prevent performance problems, do not use propane/LP fuel
tank of less than 100 lbs. capacity (propane/LP only).
18. Provide adequate clearances around air openings.
19. The screen or any other part removed for servicing must be
replaced prior to operating this heater.
PRODUCT IDENTIFICATION
900720-00E
4
Astria.us.com
Log Set
Base Assembly
Front Burner
Remote Control
Cont.
S M T W T F S
AM
PM
ROOM
SET
P1
A
P1
P2
P2
Pilot
:
ON THE
RMO OFF
°
u
°
PROGRAM
MODE/SE
T
Top Outer Casing
Top panel
Assembly
Fireplace
Hood
Bottom Panel
Assembly
Screen
Assembly
Magnet
Left Side
Right
Side
Front
Figure 1 - Log Base Assembly
Figure 2 - Fireplace
