Astria.us.com
900720-00E
27
OPERATION
Continued
2. Touch the UP or DOWN Buttons to adjust the
day of week (press the MODE/SET Button or
wait for 15 seconds for adjustment to be ac-
cepted, then enter hour of day adjustment).
3. Press the UP or DOWN Buttons to adjust
the hour of the day. The time will advance in
1-hour increments; AM and PM will change
when the hour advances to 12:00 midnight
and 12:00 noon respectively (press the
MODE/SET Button or wait for 15 seconds for
adjustment to be accepted, then enter minute
of hour adjustment).
4. Press the UP or DOWN Buttons to adjust the
minute of the hour. The time will advance in
1-minute increments (press the MODE/SET
Button or wait for 15 seconds and the trans-
mitter will exit Day/Time Setup and return to
normal operation).
5. LCD Displays – when in Day/Time Setup:
• MODE Zone: Blank
• ROOM TEMP Zone: Blank
• SET TEMP Zone: Bank
• TIME/PROG Zone: Day of Week, or Time
of Day will Flash
• FLAME Zone: Blank
Program Operation
•
Touch the TIME/PROG Zone to activate or
deactivate Program Operation. Touching the
MODE Zone or pressing the MODE/SET But-
ton will also deactivate Program Operation.
When Program Operation is deactivated, the
transmitter will return to MANUAL OFF Mode.
•
Program Operation will cycle fi replace igni-
tion ON and OFF based on time settings (2
weekend periods and 2 weekday periods)
and thermostat settings. Press the MODE/SET
Button or wait for 15 seconds to advance to
each subsequent program setting.
•
To enter Program Setup, touch and hold the
TIME/PROG Zone for 5 seconds.
•
Program OFF LCD Displays:
• MODE Zone: OFF
• ROOM TEMP Zone: Measured temperature
is displayed
• SET TEMP Zone: Blank
• TIME/PROG Zone: Current day indicator,
current time, and Program status (P1- OFF
or P2-OFF) is displayed
• FLAME Zone: Blank
•
Program ON LCD Displays:
• MODE Zone: THERMO and either ON or OFF
is displayed
• ROOM TEMP Zone: Measured temperature
is displayed
• SET TEMP Zone: SET TEMP is displayed
• TIME/PROG Zone: Current day indicator,
current time, and Program status (P1- ON
or P2-ON) is displayed
• FLAME Zone:
- If Thermostat is ON, A Flame Icon and fl ame
setting level number is displayed.
- If Thermostat is OFF, display is blank.
Program Disable Feature
•
The Program Mode (described above) may
be disabled for applications where a program
operation is not allowed or undesirable. When
Program Mode is Disabled:
• The user will not be able to activate Program
Mode
• The user will not be able to enter Program
Setup or edit Program Mode settings.
• The TIME/PROG zone will continue to display
the Clock and Day of week, but none of the
icons associated with Program Mode will be
displayed.
•
To disable or re-enable the Program Mode,
the transmitter must be in MANUAL OFF
Mode, then touch and hold the TIME/PROG
Zone and the DOWN Button simultaneously
for 10-seconds. The LCD screen will go blank
except either PROGRAM and OFF (OFF display
in MODE Zone) or PROGRAM and ON (ON
display in MODE Zone) will fl ash 3-times
(0.5-seconds OFF, 0.5-seconds ON) to indi-
cate the change has been made.
Flame-A (or Main) Adjustment
•
Transmits a fl ame height setting command
to the control module to adjust the Flame-A
height.
