95
Info
The Info menu (caller list, redial,...) can be programmed.
New info
If there are new messages or new calls for example on the caller
list, the list entries are called up directly using the programmed
key.
Caller list
The caller list (local or system) is accessed.
Redial list
The redial list (local or system) is accessed.
Voice box
Assigns the key with the selection of the voice box.
Acknowledge message
The key is used to acknowledge messages that have been received
(paging).
New text messages
Programs the key with access to new text messages.
Menu
The key is assigned with the menu access.
System menu
Programs the key with menu access to the system menu / main
menu.
Personal directory
Access to the phone book is assigned.
Central directory
Access to the system phone book is assigned.
Navigation
Assigns the key with the alternative access to the functions that lie
on the navigation keys..
SOS call: with confirmation Assigns the key as an SOS emergency call key. Dials the phone
number stored in the menu
❯❯❯
-> Security ->SOS call -> SOS
number (after a confirmation prompt).
SOS call
Assigns the key as an SOS emergency call key. Immediately dials
the phone number stored in the menu
❯❯❯
-> Security -> SOS
call -> SOS number (without confirmation prompt).
Aastra 620d/630d: Do not assign this function to the middle or left
softkey (see page 33) if you want the SOS emergency call key to be
available also in the connection state.
Take
Programs a key which you can use to take an existing call
connection from a phone connected in parallel (depending on the
software installed on the phone system) – see page 39.
94
Key programming
Your handset provides the possibility of assigning frequently used functions to specific keys.
Aastra 610d
You can program the left and middle softkey below the display and the left and right navigation
keys. The left and right programmed navigation key can also be used in the handset’s connection
state.
Aastra 620d / 630d
You can program the left and middle softkey below the display. These programmed keys can only be
used in the idle state. The three sidekeys (left), the Hotkey (right) and the left and right navigation
key can be programmed as before. These programmed keys can be used in the handset’s idle state
and connection state.
Once you have programmed the keys, the icon for the programmed function is indicated on the dis-
play (does not apply to the Hotkey). All you need to call up the function is a short keypress.
Note
Please note that some functions can only be displayed in the connected state. For instance if you call
up the call list, you can browse through it and edit it, but you cannot dial a call number directly from
the list.
Programming (general)
Press the respective key and hold it for a moment or use the Menu
❯❯❯
-> Settings -> Key pro-
gramming (see page 79).
The following selection is offered:
If you press the softkey
during key programming, you obtain the default key of the factory set-
ting. Press Ok to accept it.
No function
The key is not assigned.
VIP list
The key is assigned with a number list (max. 6 entries).
Alarm clock
You can program entry to the alarm clock settings.
Appointment
You can program entry to the appointment settings.
Profile
The selection of profiles is offered.
Key programming
Key programming
