ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
90
Copyright © 2010 Advanced Simulation Technology inc.
10. In the Op1_Panel, open the
Intercom Bus Service
.
11. In the Intercom Bus Service, add four new buses and name them.
12. Navigate back to the
Op1_Panel
and assign signal 1-4 to the busses by double-clicking in
the value column. In the Intercom Bus Service select a bus and then select the ‘
Set Value
’
button.
13. Open the
Op1_ACUchannel
and assign the identifier and channel.
14. Copy and paste the
Op1
folder and name it
Op2
folder.
