ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
Copyright © 2010 Advanced Simulation Technology inc.
81
9.5.2. Creating a Sound Library
In the Project Manager > Sound Repositories, right-click to add a new sound library and name it
accordingly. Open the Sound Library Editor and add groups, as necessary, to the library. The
groups provide organization of the sound files.
To upload sound files to the Target open RMS and navigate to the Audio section. Open the
Upload Sound Files page and follow the instructions to add individual .wav files or upload one
.tgz archive containing multiple sound files. See the Remote Management System 4 User Guide
(DOC-01-TEL4-RMS4-UG-4) for more information on uploading sound files.
Important:
All sound files must be in the following format: 16-bit PCM MONO wave files with a
48khz sample rate. RMS will give you an error if the file is not in this format.
To locate soundfiles on the Target you must ‘ssh’ into the Target. From the ACE Studio Project
Manager right-click the Telestra in the Layout and select ‘ssh.’
In the command line type the following:
cd var/local/asti
or
cd var/local/asti/soundfiles/<waveset>