ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
Copyright © 2010 Advanced Simulation Technology inc.
67
9.2. Mixer
The mixer component provides controlled mixing of up to eight signals into a single, composite
signal. The mixer controls determine which of the eight signals should be mixed with both indi-
vidual and overall gain control. There is also a ninth signal that is always mixed into the output
signal and allows cascading of multiple mixer components.
1. Create a new Project and install.
2. In the Load, create a new Sim model and name it.
3. Open the new model and add two
Audio > Wave
components and name them
‘
Sine_Wave’
and
‘Square_Wave
.’
4. Then add an
Audio > Mixer
component and an
I/O > ACU Channel
component (name
them Mixer and ACUchannel_A).
5. Open the Sine_Wave and set the frequency (for example 400). Route the Sine_Wave out-
signal to the Mixer using signal1.
