ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
50
Copyright © 2010 Advanced Simulation Technology inc.
7.2. Host Control in the Load and Model Level
In the Load, add a host model. This is required in order to create the host I/O packets. Inside the
host model, select to add either a HostIn or HostOut packet when creating a host I/O packet com-
ponent.
Before getting into the details of the HostIn and HostOut packets, there are a few general things to
note about creating packets. Each packet must be assigned to a socket, only one host I/O packet
can be linked to a single socket at a time. Select the ‘
change
’ link to assign the packet to a socket.
