ASTi Telestra 4 Training Manual (Ver. 1, Rev. F)
30
Copyright © 2010 Advanced Simulation Technology inc.
5.2. Load Viewer
A Load is a collection of models, which have been built
and linked together to form a communications and
sound model to run on a selected Target. Models can be
generated via ACE Studio’s model development tools,
or through the various Helpers or a combination of both.
An empty Load can be generated in the Project Manager
by selecting the Loads folder, right-clicking on the can-
vas and selecting ‘Add’ from the pop-up menu. The
models contained in the load are then created using the
ACE Studio model builder generation tool.
A Load can also be created from scratch within the ACE
Studio model builder generation tool. When working in
the Load selecting to ‘save’ will save the current load to
the project. The user must then save the Project to pre-
vent losing any data when closing ACE Studio.
To apply a Load to a Target, double-click on the desired
Target in the Layout view. The Target configuration
window will pop-up with a Load list and allow the user
to select a Load to run on a Target.
Note
: The user should understand the difference between a Project and a Load. A Load is a model
set for a specific Target whereas a Project is a complete configuration of Loads, Comm Plans,
Servers, etc. across one or more Targets, servers and simulation applications.