Asset ATLANTIS 120, Installation, User And Maintenance Manual

Page: 35 / 72

5-3
ATLANTIS - Installation, Use and Maintenance - Man cod.-02 - Rev. 02/2011
5.4.2 Taps assembly
The device is supplied with disassembled
taps, therefore it is necessary to
reposition them.
Proceed as follows (see fig.
5.3):
- insert the conical part of
the tap in the tap holding
cavity already assembled
on the dispenser;
- Turn the chrome ring nut
counterclockwise screwing it
on the tap until the two parts
are completely tightened;
- Repeat the same operation for each
tap.
ATTENTION:
the three taps are NOT equal; packing list includes 2
Tap + 1 stainless steel Tap. For the sparkling water
you MUST absolutely install the stainless steel Tap.
Do not use pliers, wrenches or other tools to tighten the
ring nuts of the taps, just tighten them manually or use
the appropriate spanner supplied. (CODE M-CHIAVEXATL –
PIN WRENCH FOR ATLANTIS PRE-MIX TAPS).
fig. 5.3
fig. 5.6
fig. 5.4
fig. 5.5