Asset ATLANTIS 120, Installation, User And Maintenance Manual

Page: 48 / 72

6-8
ATLANTIS - Installation, Use and Maintenance - Man cod.-02 - Rev. 02/2011
6.9 Water Temperature Adjustment
1. The User Menu is accessed by pressing the front
Menu Access Key for at least 3 seconds - or
until the beep is heard; (same key must be used to
scroll between the Menu sections).
2. the [REFRIG. TEMP] message is displayed (default value
=ICE°C)
3. by operating on the and keys is possible
to change the Temperature among 2°- 4°C , or to
ICE°C (default) or to OFF.
4. when the desired value is set, press the key
until the [SAVE SETTINGS?] message is displayed;
5. press simultaneously the keys and to save
the settings; the [OK SAVED] message should be
displayed followed by a confirming beep, after few
seconds the display will shown the home screen.
6.10 Energy Saving Function
1. The User Menu is accessed by pressing the front Menu
Access Key for at least 3 seconds - or until the
beep is heard;
2. press again the rear menu key until the [ENERGY
SAVING] message is displayed;
3. by operating on the or keys it is possible to
change the function choosing “0” (all keys backlight
ON) disabled or “1” (all keys backlight intermittent
flash) or “2” (all keys backlight OFF) enabled;
4. when the desired value is set, press the key
until the [SAVE SETTINGS?] message is displayed;
5. press simultaneously the keys and to save
the settings; the [OK SAVED] message should be
displayed followed by a confirming beep, after few
seconds the display will shown the home screen.