Asset ATLANTIS 120, Installation, User And Maintenance Manual

Page: 27 / 72

3-1
ATLANTIS - Installation, Use and Maintenance - cod. Man-02 - Rev. 02/2011
3.1 General notes
The dispenser was designed and manufactured in compli-
ance with the requirements of the Machinery Directive
2006/42/EC, taking into account its ordinary use and the
reasonably intended use.
The dispenser was manufactured for the application
mentioned in the declaration of conformity enclosed to
this manual.
It is not allowed for any reason to use it for purposes
different that those for which it was designed, or to use
it with modalities different than those indicated in this
manual. The different interventions must be carried out
in accordance with the criteria and the order described
in this manual.
3.2 Symbols
Some operations are indicated in this manual by graphi-
cal symbols that recall attention on the hazardousness of
the operations. The symbols are positioned on the lateral
column, as shown in this page.
3.
Safety requirements
WARNING
Before carrying out any operation
on the machine it is neces-
sary to read the whole manual
thoroughly, paying special at-
tention to this chapter.
WARNING
This symbol indicates the possibil-
ity that an event occurs that can
cause serious injury or considerable
damage to the machine, if suitable
precautionary countermeasures
are not adopted.
CAUTION
This symbol indicates the possibility
that an event occurs that
could cause minor injury or m
terial damage to the machine, if
suitable precautionary counter-
measures are not adopted.
IMPORTANT
This symbol indicates the possibili-
tythat an event occurs that could
causeminor injury or material damageto
the machine, if suitableprecautionary
countermeasures arenot adopted..