Asset ATLANTIS 120, Installation, User And Maintenance Manual

Page: 43 / 72

6-3
ATLANTIS - Installation, Use and Maintenance - Man cod.-02 - Rev. 02/2011
6 Pull the ring of the safety valve of the
carbonator purging gas for at least 2/3
seconds
(see at side);
7 Open the water interception tap;
8 Check that they are no leakages on the internal and
external fittings of the device and near the tube con-
nection points;
9 Place a container, with a capacity of at least 5 litres,
under the dispensing taps;
10 dispense at lest 3/4 litres of room temperature still
water;
11 dispense at lest 3/4 litres of cold still water;
12 Insert the power connection plug and position the
switch on 1 (on) to start the device
(point 1)
;
13 Position the thermostat knob on number 7
(point 2)
;
14 Wait 2/3 minutes;
15 Position the container under the left
dispensing
WARNING
if the device is operated without
water in the ice bank it will cause
serious damage to the device.
fig. 6.7
fig. 6.8
ATLANTIS 180 Touch TT (Table Top)