Asset ATLANTIS 120, Installation, User And Maintenance Manual

Page: 33 / 72

5-1
ATLANTIS - Installation, Use and Maintenance - Man cod.-02 - Rev. 02/2011
5.1 Environmental characteristics
The operating environment must have the following
characteristics:
- Temperature: + 5 ÷ + 40 °C (41 ÷ 104 °F)
- Maximum relative humidity: 80%
The dispenser must not be used in open areas and/or
exposed to atmospheric agents or in environments with
steam, fumes or corrosive and/or abrasive dusts, with risk
of fire or explosion, and however where the use flameproof
components is required.
5.2 Cleaning
Before starting up the dispenser it could be necessary to
clean the equipment from dust, foreign substances and dirt
accumulated during the transport and storage periods.
For cleaning do not use used or dirty cloths since the
dispensing point that was sanitized before the dispatch
could be inexorably contaminated. For example, for clean-
ing use a new piece of blotting-paper slightly dampened
with not aggressive detergent and disinfectant products
diluted in water. Do not use solvents or alcohol-based
products. Do not touch the dispensing points with dirty
hands.
The ventilation slits of the dispenser, on the right
side, must be cleaned by using a dry brush.
5.3 Positioning
The dispenser must be placed on a surface which can
support its weight including water (gross weight, see
technical sheet) or on a proper optional stand in a verti-
cal position.
5.
Installation
CAUTION
If environmental conditions differ-
ent than those required are noticed
during installation, or if they change
over time, immediately contact the
Manufacturer beforeusing the dis-
penser for the necessary checks.
CAUTION
Do not use liquids containing
solvents or abrasive materials
to clean the dispenser.