V4.3 10/09/19
UD0090
Page 37 of 143
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
8.4
DOOR ADMINISTRATION
NOTE:
This process can only be performed by an Admin User.
The door administration process allows you to configure each compartment number. For example if you wanted the
compartment numbers to run from left to right, or if you wanted them to run from top to bottom, any combination is
possible.
1.
Access the system and click Admin.
2.
Click Doors.
3.
Click Setup.
4.
A message will appear asking if you wish to setup all doors. Click Yes.
5.
All of the doors in the system will now open. During this period do not close any of the doors.
