15
7300 Series
Installation Instructions
Multi-Point Lock
A8270A 02/20
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
4
Optional Installation (cont.)
a
Dogging Indicator Installation (cont.)
Install the indicator on the inside of the door using supplied 10-24 x 2" oval head screws. Make sure the
control fingers grab the top rod pin as shown.
(Figure 30)
Figure 30
Side View
Pin
Control Fingers
Check for proper operation. Rotate the lever until the indicator window shows a single latch point.
(Figure 31)
Figure 31
Single Latch
Point
3-Latch
Points
Indicator
Window
Note:
To dog the top and bottom latches in a retracted state, fully rotate the lever and move the slider on the
indicator to the left.
