Record Your Key Number:
(located on the set of locking keys)
Send in the application on the box flap for Key Club
Membership (to order additional matching cores or keys).
Use a key to dislodge
the black plastic plug
from the lock housing.
Use the inserted
key to install the
locks into the lock
housings.
NOTE: If you wish to remove the core,
the lock must be in the unlocked
position, and you must use the flat-
edged Control Key. Insert the Control
Key completely to pull the core out.
Use the locking keys
to LOCK UP.
Push the core all the way into the
housing. Hold the core with the tip
of your thumb as you pull out the
flat-edged Control Key. The lock
should remain in the housing.
IMPORTANT—
You may need to rotate the small hole inside
the lock housing so that the point on the
lock core will align.
Insert the flat-edged
Control Key into the lock core.
SKS
*
LOCK CORE
INSTALLATION
*SKS refers to the Yakima Same Key System. Refer to your Yakima
rack or accessory instructions for Yakima‘s Limited Warranty.
CONTENTS
Control Key
Lock
Locking Keys
(flat edge)
Core
On some housings,
you must rotate the
moving parts behind the housing.
Refer to the rack or accessory instructions.
Part #1030431 Rev.D
Record Your Key Number:
(located on the set of locking keys)
Send in the application on the box flap for Key Club
Membership (to order additional matching cores or keys).
Use a key to dislodge
the black plastic plug
from the lock housing.
Use the inserted
key to install the
locks into the lock
housings.
NOTE: If you wish to remove the core,
the lock must be in the unlocked
position, and you must use the flat-
edged Control Key. Insert the Control
Key completely to pull the core out.
Use the locking keys
to LOCK UP.
Push the core all the way into the
housing. Hold the core with the tip
of your thumb as you pull out the
flat-edged Control Key. The lock
should remain in the housing.
IMPORTANT—
You may need to rotate the small hole inside
the lock housing so that the point on the
lock core will align.
Insert the flat-edged
Control Key into the lock core.
SKS
*
LOCK CORE
INSTALLATION
*SKS refers to the Yakima Same Key System. Refer to your Yakima
rack or accessory instructions for Yakima‘s Limited Warranty.
CONTENTS
Control Key
Lock
Locking Keys
(flat edge)
Core
On some housings,
you must rotate the
moving parts behind the housing.
Refer to the rack or accessory instructions.
Part #1030431 Rev.D
