background image

 

 
 
 

 
 

INSTRUCTION MANUAL

ELECTROMECHANICAL LOCK

Force 600N – Strokes 18 
Electrical feeding 24V

 
 
 
 

NEKOS

 S.r.l. - Via Capitoni, 7/5 

  

 +39 0424 411011 

EN 

 

4420088 – Rev. 2003 

 

K-LOCK 

INSTRUCTION MANUAL 

ELECTROMECHANICAL LOCK

 

Strokes 18 - 36 mm 

Electrical feeding 24V

 

 

 
 
 
 
 
 
 

 

 

Via Capitoni, 7/5 - 

36064 Colceresa (VI) –

+39 0424 411011 – 

 +39 0424 411013 - www.nekos.it - [email protected]

 

 

 

– ITALY 

[email protected] 

 

 

USER INSTRUCTIONS 

 

 
 

CAUTION.  Carefully  observe  all  the  following  installation 
instructions to ensure personal safety.  
The  device  is  not  intended  for  use  by  persons  (including  children) 
with  reduced  physical,  sensory  or  mental  capabilities,  or  lacking 
experience  and  knowledge.  Do  not  allow  children  to  play  with  the 
fixed controls and keep any remote-control units out of their reach. 
Have  installation  checks  performed  periodically  by  qualified 
personnel from a service centre authorised by the manufacturer. Do 
not use if repair or adjustment is required.  
CAUTION:  if  the  power  cable  is  damaged,  it  must  be  replaced  by 
qualified  personnel  from  a  service  centre  authorised  by  the 
manufacturer. 
CAUTION.  Disconnect  the  power  supply  during  cleaning  or 
maintenance  operations.  Do  not  use  solvents  or  jets  of  water  to 
wash  the  appliance;  the  appliance  should  not  be  submerged  in 
water. 
In the event of fault or malfunction, switch off the device at the main 
switch.  All  repairs  and  adjustments  (e.g.  setting  the  stroke)  must 
only  be  performed  by  qualified  personnel  from  a  service  centre 
authorised by the manufacturer.  
Always  request  exclusive  use  of  original  spare  parts.  Failure  to 
respect  this  condition  could  compromise  safety  and  invalidate  the 
benefits contained in the warranty for the appliance. In the event of 
any  problems  or  queries,  consult  your  agent  or  contact  the 
manufacturer directly. 
The A-weighted sound pressure level is less than 70dB(A). 
Carefully preserve these instructions after installation. 

 
 
 
 
 
 
 

Summary of Contents for K-LOCK









Reviews: