SL3001 Decibel Ultra HD 28” Cable
Lock with Alarm
The SL3001 Decibel Ultra HD 28” provides the ultimate theft deterrent by
integrating a 110 decibel siren with a robust 28” cable covered by armoured
steel links enclosed in a protective plastic sleeve.
Features:
•
Secure nearly anything, large or small, with a strong steel cable (ex.
bicycles, grills, ladders, lawnmowers, tools).
•
110 decibel siren scares away potential thieves if the steel cable has been
cut approximately 50%.
•
Comes with 2 keys. Register yours at
www.decibellocks.com
to order
replacements.
Included with this Product:
1.
Decibel Ultra Heavy Duty 28”
2.
2x keys
Requires 2 AAA batteries (not included).
Parts of the Lock:
1.
Lock body
2.
Lock cylinder
3.
Cable
4.
Cable lock hole
5.
External battery cover
6.
LED light
7.
Test button
Installing the Batteries
Note: The external battery cover can only be removed when
unlocked to prevent tampering.
1.
Using a Phillips screwdriver, remove the two screws on the external
battery cover. Remove the external battery cover (Fig. 2).
2.
Remove the screw on the
internal battery cover (Fig. 3).
3.
Insert 2 AAA alkaline batteries
(not included) (Fig. 4). Ensure
the polarity is correct.
4.
Replace the internal battery
cover by tightening the single
screw.
5.
Replace the external battery
cover by tightening the
remaining two screws.
6.
Test the alarm. Lock the cable in
the cable lock hole. Using a pen,
press and hold the recessed test
button under the label until the
alarm sounds (Fig. 1). Use the
keys to unlock the lock to disable the alarm.
Note: Batteries will last 6-12 months on average.
Using the Alarm Cable Lock
1.
Wrap the cable around or through
the items you wish to secure, and
through a fixed object such as a
post or railing for maximum
security (Fig. 5).
2.
Insert the steel end of the cable
into the cable lock hole until you
hear a
beep
. It will lock automatically as you do this, so ensure you have
the key on-hand. The LED light will flash a few times to indicate that it is
now locked and armed. It will then flash every 7-8 seconds.
3.
To unlock it, insert the key and turn it a
¼ turn to the right. Remove the cable
from the cable lock hole (Fig. 6).
W arning: All Decibel products contain a very loud siren as a theft
deterrent. If used at close range for prolonged periods of time, this
may cause ear damage or hearing loss. Do not hold close to ears,
and keep a way from small children.
Disclaimer: The Decibel Ultra Heavy Duty 28” has been designed as a
deterrent to theft. The manufacturer/supplier will not accept any liability for
personal injury, property damage, or loss.
Register Your Keys!
Replacement keys can be ordered via our website,
www.decibellocks.com
.
To order replacements, register the serial number of the keys (
not
the lock)
online. If you lose your keys and don’t know the serial number, we cannot
send replacements! We strongly recommend that you note the serial number
attached to your keys and register it on our website. This way, if you lose
your keys or forget your serial number, we can find it for you.
We also recommend separating the keys immediately and storing one in a
secure location.
Disclaimer: Please note that replacement keys will be shipped by standard
mail, and cannot be rush ordered. Not all keys will be available immediately,
and some may be discontinued. Ideal Security does not accept liability for any
lost or stolen keys that have not been registered through our service.
For additional support, please visit
help.idealinc.com
, or contact us at
or at 1-800-361-2236.
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 1
