SELO-B (Version 1.0)
Electronic lock
USER INSTRUCTIONS
A) GENERAL
Multifunction keys ‘1’ and ‘2’
for entering figures and words,
and for menu navigation
Rotary handle for unblocking
the lock
Keys ‘0’ - ‘9’ for entering
numbers and plain text
3 lines for entering codes and
displaying messages
1 line for displaying battery
condition and key functions
Function key for correcting data
input and selecting menu
functions
On/Enter-key to switch on the
unit, select functions and to set
the lock to its starting position
...If, after waiting for 5 minutes, the wrong code is entered
again, the lock will block itself for a further 20 minutes
(manipulation resistance). During this time, the remaining
delay is depicted on the display and not even the valid number
code will open the lock.
• If more than 30 seconds lapse between pressing any two
keys, the lock automatically switches itself off for safety
reasons. The opening procedure has to be started over.
• Once data have been stored (numerical codes, time frame and
user entries), not even a power failure will delete them.
• The opening procedure consists of two operations: CLEARING
and UNBLOCKING.
• To start the opening procedure, check that the input unit is in
the vertical end position.
• All accepted key strokes will produce a response on the display.
• If the code number is keyed in by mistake, return to the starting
position of the lock by pressing the On/Enter key, and start
over.
• After entering the wrong secret code three times in a row, the
lock will automatically block all further entries for 5 minutes...
Electronic lock model SELO-B allows you to open the lock either immediately, after entering the valid 7- or 8-digit secret code, or after
expiration of a preset opening delay. The lock’s time functions can be set such that access is only granted at the preselected times. The
maximum number of codes for clearing the lock is 40.
• Battery condition ‘full’
• Key marked ‘Function’ to
select the desired menu
from the setting mode
• Battery condition 1/3
•
Key marked ‘Function’ to
return to next higher menu
level
•
Keys ‘1’ and ‘2’ to
navigate through the menu
• Battery condition 2/3
• Key marked ‘Function’ for
deleting the figure entered
last
• Battery condition ‘almost
empty’
