SELO-B (Version 1.0)
Electronic lock
USER INSTRUCTIONS
Selecting a different language
1) Having entered the setting mode, use keys
‘1’
and
‘2’
to go to
the field
Language/Sprache
in the menu (factory setting when
the lock is installed the first time is
German (deutsch)
. Select by
pressing the
On/Enter
key.
2) Use keys
‘1’
and
‘2’
to go to the language of your choice.
Select the new language by pressing the
On/Enter
key. From
now on, all messages will appear in the language of your choice.
To leave the present menu field in the setting mode, press the
Function
key whenever you see the symbol
‘<’
above the key.
After leaving the setting mode, the lock is again ready for
clearing. The operator is prompted to enter a valid secret code
in the language of their choice.
Entering the setting mode to change the language setting
1) Press
On/Enter
key. When the lock is ready for operation, the
welcoming phrase on the display is followed after two seconds
by a message prompting the operator to enter a valid code.
The black rectangular cursor sits blinking at the first digit of
the code entry field and the capital letter
‘M’
appears above
the
Function
key.
2) By pressing the
Function
key, the menu of the setting mode
appears. In this mode, keys
‘1’
and
‘2’
serve as operating
symbols for menu navigation (up or down). The first menu to
appear is
Code change
. Use the same keys
‘1’
and
‘2’
to
address the other options on the menu.
D) CHANGING THE LANGUAGE
E) REPLACING THE BATTERIES
As soon as the symbol depicting the battery condition indicates ‘almost
empty’, the operator is also warned
Please replace batteries!
each
time the lock is operated. We recommend you heed the advice and
change the batteries! The lock can only be unblocked a further,
approximately, 50 times. Please note that none of the number codes
can be changed until a set of fresh batteries has been fitted. To change
the batteries, lift off the cover of the battery compartment with the tip
of a screwdriver. Fit three leak-proof, type Mignon LR6, AA, alkaline
batteries, paying attention to the correct polarity. Dispose of the old
batteries in accordance with anti-pollution legislation!
Used batteries should not be disposed of with normal domestic waste.
These should be disposed of at approved collection points.
You may also return used batteries to your Retailer at their expense
(where applicable).
F) ADDITIONAL LOCK SETTINGS
For detailed information about the additional lock functions, please check the CD-ROM supplied with the lock. These functions cover:
- Time functions--------------- Set time
- Set date
- Set access time frames------------ Input range for timer A
- Input range for timer B
- Block for holiday periods----------- Once-only holiday periods
- Annually recurring holiday periods
- Opening delay
- Calibrate clock
- Activate automatic changeover from summer to winter time
- Administrator functions
- Define number of digits of secret codes
- Reorganize
- Block user authorization for a change of code(s)
- Reset time functions
- Read out list of operations
- Display lock information
