16
7300 Series
Installation Instructions
Multi-Point Lock
A8270A 02/20
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
5
Addendum
This addendum is to be used as a reference for pre-installed hardware (latches and cassette). The
following steps are for ease of reference as they have been completed in advance by the door
manufacturer.
a
Check
Door
Verify the door is:
• Correct size and hand for opening.
• Correctly prepared to Template 4740.
(Figure 32)
IMPORTANT
If measurement is incorrect, DO NOT PROCEED
WITH INSTALLATION. Contact door manufacturer.
b
Place Door Horizontal on Sawhorse
(Figure 33)
Note:
Orient the door face holes on top.
Figure 32
of Lockbody
Outswing Door
Shown
± 5/64"
39-9/16"
(101.4 cm)
L
C
Door Height
Door Width
Figure 33
