17
7300 Series
Installation Instructions
Multi-Point Lock
A8270A 02/20
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
5 Addendum
(cont.)
c
Install Lockbody Cassette (LBC)
• Using the supplied 3/32" Allen wrench, rotate both
LBC worm gears to align
slots in the LBC gears to the orientation shown.
(Figure 34)
Alignment is needed for
proper installation of the
rod guide. (Step 3h)
• Slide the LBC into the door case and secure with
two (2) #12-24x1" flat head screws.
(Figure 35)
d
Latch Rod Guides
• Rod guides help installation by directing the rod
into location in the LBC within the door cavity.
• Pull rod guides away from latches on both
rods until they stop. (Figure 36)
LBC Gear
Worm Gear
Worm Gear
Slot
Figure 34
Top Edge
Figure 35
Before
After
Retainer Clip
Note:
Bolt retainer clips
must remain attached
until step 5g.
Guide
Guide
Figure 36
