ASP motioncare LIANA, User Manual

Page: 29 / 50

Gebrauchsanweisung LIANA
| Version 1.0
Seite 29 von 50
11. OPERATION
11.1. Switching the device on and off
After inserting the battery and closing the battery compartment, the device is ready for operation. Check the battery
charge beforehand -> Charge level indicator on the manual switch.
After exiting the product’s idle mode, the product
remains in standby mode. The drive is only activated after the function keys have been pressed.
Note: Pressing the safety switch and opening the door to the battery interrupts all electrical functions.
11.2. Battery / rechargeable battery
If the battery charge is low after checking, charge the battery using the charging station supplied. To remove the
battery, press the levers on the back/top of the battery. Then connect the battery to the charger by pushing the
battery into the charging station until it engages.
ATTENTION
After disconnecting the battery for charging, make sure that the battery contacts do not come into contact
with conductive elements. This could damage the battery and cause a fire!