ASP motioncare LIANA, User Manual

Page: 18 / 50

Gebrauchsanweisung LIANA
| Version 1.0
Seite 18 von 50
8. LUMBAR SUPPORT
Adjust the lumbar support to a comfortable position.
To do this, pull out the latching element
(1) .
Make sure that the latching element re-engages
correctly when released to guarantee a secure
hold.
9. BACK SECTION
Adjust the backrest to a comfortable position. To
change the height of the back section, pull out the
latching element
(2) .
Make sure that the latching element re-engages
correctly when released to guarantee a secure
hold.
Recommended position of the backrest:
Top edge of backrest => Height of collarbone.
ATTENTION
When lowering the lumbar support and backrest, there is a risk of pinching! Please exercise due care when
lowering.
10. HEADREST
Adjust the headrest to suit the patient and fix it in
place.
To change the position of the longitudinal
adjustment, pull back the latching element
(3) and
adjust the desired position of the headrest
individually. After reaching the desired position,
release the latching element
(3) again and make
sure that it engages securely.
To adjust the height of the headrest, pull the
latching element
(4) and adjust the height via the linkage (5) . After you have set the desired height, release
the latching element so that it re-engages. Make sure that all latching elements are engaged securely. The
head can additionally be stabilised using a strap. There are fastening eyes on the side of the headrest.