ASP motioncare LIANA, User Manual

Page: 22 / 50

Gebrauchsanweisung LIANA
| Version 1.0
Seite 22 von 50
8.2. Standing mobilisation/standing stabilisation
Initial standing directly in front of the bed " Standing stabilisation on 1m
² “
1. CHECK THE BED
Before mobilising the patient, check the technical condition of the bed on/at which the mobilisation process
is to take place.
2. CHECK LIANA
Before mobilising the patient, check the technical condition of the device with which the mobilisation process
is to take place.
3. ARMRESTS
For the standing mobilisation/standing stabilisation
process, the arm supports must be rotated by 180°.
Loosen the star grip
(1) and slide the armrest
completely off the arm/strut. Note: Make sure that
the "safety T-element" is not mounted. Then slide
the rotated armrest back onto the arm/strut. Tighten
the star grip
(1) in the selected position.
Repeat this process on the other armrest.
To adjust the armrests inwards and/or outwards
(sideways), pull back the locking lever
(2) and move the armrest to the right or left. Make sure that the
locking lever/latching element re-engages accordingly once the desired position has been reached. Repeat
the process on the other side.
After setting the desired position, make sure that all components have been fixed or engaged.
4. SET THE PATIENT UPRIGHT
The patient is mobilised and held at the edge of the
bed by qualified medical personnel. The "sitting at
the edge of the bed" mobilisation process is carried
out
involving two qualified medical
professionals/therapists.
The patient sits as far as possible inside the bed.