9
contacts, glass break detectors, etc. When a signal is received the status changes
and the input becomes active.
1 set of Digital Output (Digital Out + GND) – The output to Relay Box or Relay
Board, and switch on the alarm device such as LEDs, Sirens, etc.
Digital Input (Alarm Input)
GND (Ground):
Initial status is LOW.
Alarm:
Max. 50mA, 3.3VDC.
Digital Output (Alarm Output)
Relay Board
or
Relay Box
Door/Window
Contacts
Summary of Contents for CAM6923F
