83
7. Factory Default
To recover the default password and other settings, please follow the steps:
1. Power off this device.
2. Remove the cover of device.
3. Push the "Factory Default Button" as shown on the picture below, and keeping
push it and don't release.
4. Power on the device. Don’t release the button during the system booting.
5. It will take around 60 seconds to boot the device.
6. Release the button when the device finishes proceed.
7. Re-login the device using the default username (admin) and password (admin).
8. The IP address is probably restored to the default, in this case, use IP Search
utility to search the device. The default IP address is 192.168.1.200
Factory Default
Button
Summary of Contents for CAM6923F
