53
IP Filter Setting
The IP Filter function allows you to create the IP address list to manage the clients that are
allowed or denied to access this device.
IP Address Filter Setting
Enable IP address filter:
Click the checkbox to enable this function.
IPv4 IP Address:
Input the IP address (single or range) that will be allowed or denied
to access this device. After input the IP address, click
[Add]
to save it, the IP address
will be listed in “IPv4 IP Address List”.
IPv4 IP Address List:
Here lists the Allow/ Deny IP addresses. To remove the IP
address from the list, just click
[Remove]
button on the right.
IP Filter
Setting
Summary of Contents for CAM6923F
