33
Day/Night Image Setting
You can set the following parameters for Day (in “During Day” row) and Night (in
“During Night (IR is ON) row” separately,
Brightness / Contrast / Sharpness:
Adjust these parameters to get clear video.
Denoise (2D+3D):
This camera supports 3D and 2D “Digital Noise Reduction”, adjust
this parameter to get clear video.
Day/Night Switch Setting
If the camera equips ICR (IR Cut Filter), you can configure the “Day/Night Color Mode
(ICR)” to determine when to switch on/ off the ICR.
Auto (by Defined-Lux):
You can define the Lux of environment to change the color mode automatically.
When the environment is brighter than “Color – when over”, the video will display
in color; when the environment is darker than “Mono – when under”, the video will
display in mono color (black and white).
You can click
[Refresh]
button to detect the current Lux of environment.
Always Color:
The video will always display in color.
Always Mono:
The video will always display in mono color (black and white).
Auto (by Defined-Time):
Summary of Contents for CAM6923F
