General
Please read the instruction manual and save it for future
reference.
•
Please do not use the washing machine if you have not read
and understood these instructions or use first.
• Failure to observe the instructions for use or inappropriate use of
the washing machine may result in damage to the laundry or the
appliance, or injury to the user. Keep the instruction manual handy,
near the washing machine.
• Instructions for use are available on our website at www.asko.com.
• The appliance has to be connected to the water and power supply
by a trained expert.
• Any repair and maintenance pertaining to safety or performance
should be done by trained experts.
• To avoid hazard, damaged power cord may only be replaced by
the manufacturer, authorized service technician, or other
authorized person.
• After installation, the washing machine should stand still for two
hours before it is connected to the power mains.
• The washing machine may not be connected to the power mains
using an extension cord.
• Do not connect the washing machine to an electrical outlet
intended for an electric shaver or hair dryer.
• To connect the washing machine to water supply, make sure to
use the supplied water supply hose and gaskets. Water pressure
has to be between 0.1 and 1 MPa (approximately 1–10 kp/cm
2
,
1-10 bar, 10–100 N/cm
2
).
• Always use a new water supply hose to connect the appliance to
water supply; do not reuse an old water supply hose.
•
After the washing cycle, close the water tap and pull out the
washing machine plug from the power socket.
If you have a washing machinewith a 3-phase connection, do not
pull the plug out of the power outlet.
4
Safety precautions
