Hot water is supplied for programs operating at 40 °C or more.
INFORMATION!
Connecting to both hot and cold water will save time and electric energy when washing.
If your washing machine model has connections for both hot and cold water, and you only wish to
connect cold water, then the protective cap has to be (or remain) attached to the hot water connection.
Installing the drain hose
Upon delivery, the appliance has a drain hose attached. This drain hose must be connected to a
drain. Drain hose can also be attached to a wall drain with a trap; such trap should be properly
installed to allow cleaning. The height of the drain should be 600–900 mm above the floor. The lower
position (600 mm) is always recommended. Make sure the drain hose is not clipped or bent.
16
Installation and connection