What to do?
Cause
Problem/error
which contain ingredients
(zeolites) for water
•
Try removing any residues with a brush.
softening. These
ingredients may be
deposited on the laundry.
There is powder
detergent left in
•
•
Clean the net on the water supply hose.
Water pressure not high
enough.
the main wash
compartment of
•
Choose higher water level or extra rinse
(see "STEP 6 / Choose program settings").
•
Some washing powders
may stick strongly to the
detergent compartment if
it is empty.
the detergent
compartment.
•
Wipe the detergent compartment before
adding the powder detergent.
There is
conditioner left in
•
Make sure the plug cap in the conditioner
compartment of the detergent
compartment is positioned correctly.
•
Plug cap is not positioned
correctly or it is clogged.
the conditioner
compartment of
•
Clean the plug cap (see chapter
"CLEANING AND MAINTENANCE /
Cleaning the detergent compartment").
the detergent
compartment.
Odour in the
washing machine
drum.
•
•
Check if the filter is clean.
Residues of fabric,
washing detergent, and
conditioner in the filter.
•
•
Choose a self-cleaning (Drum Cleaning)
program (see "STEP 5: Choose the
program").
Development of germs and
bacteria.
Machine is moving
during operation.
•
•
Level the feet (see chapter
"INSTALLATION AND CONNECTION /
Adjusting the feet").
Feet not adjusted correctly.
•
•
Remove the transport bolts (see chapter
"BEFORE USING THE APPLIANCE FOR
THE FIRST TIME /Transport protection").
Transport bolts not
removed.
Machine is moving
during spinning.
•
The washing machine will automatically
decrease the spin speed if vibration is too
strong.
•
Unevenly distributed
laundry or not enough
laundry.
•
Increase the amount of laundry in the
washing machine and restart the program
(see "STEP 7: Start the wash / Adding or
removing laundry after the start of the
program").
Table continued from last page
39
Errors – what to do?
