Only appliance owner/distributor may change the settings!
(owner/distributor should check Service manual)
Description
Setting
On display
Setting affect all programs
no Drain --> max. rpm
Max. RPM
Setting of draining via valve or
pump, depending on the type of
appliance; in case of change, a
mechanical change on the
appliance is required.
Valve/Drain
Drain
In the Disinfection programs and
in the Special programs; this
means displaying the actual
measured temperature in the
drum.
On/Off
Show temp
By changing settings it is
possible to create and customize
your own program.
On each program (some
settings cannot be set on some
programs)
Change program
Program can be renamed!
On/Off
•
Prewash
°C/°F
0 --> max
•
Change temperature
no Drain --> max. rpm
•
Change spin RPM
On/Off
•
Water Level
On/Off
•
Anti-crease
Once the above changes are
done, you can save the program
Override existing/Save as new
•
Save program
as a new program or overwrite
an existing program.
At max. rpm in the Spinning
phase
0 --> 300
Spin time
Choose either °C or °F.
°C/°F
Temperature unit
Additional rinses to the program
are added.
On/Off
Super rinse
With enabled function payment
is requested, to be able to start
the program.
On/Off
Payment system
On/Off
3D sensor
30
Settings
