Stacking an ASKO dryer on top of an ASKO washing machine
To stack an ASKO dryer on top of a washing machine, use the extra vacuum feet and the tipping
guard (A+B), supplied in the cardboard box in the ASKO dryer drum.
Adjusting the feet
Place the washing machine so that it is stable.
1. Level the washing machine in longitudinal
and traverse direction by rotating the
adjustable feet (using a No. 32 spanner).
The feet allow levelling by +/- 1 cm.
2. When the appropriate height of feet is set,
use the wrench No. 17 to firmly fasten the
counter-nuts towards the bottom of the
appliance
.
3. Tighten the jam nuts (counter nuts) to the end
position.
This will reduce washing machine noise,
vibration, movement etc. to minimum.
Moving the washing machine and transport after installation
If you are moving the washing machine without packaging, open the washing machine door and
pull the appliance by holding the washing assembly, as indicated in the figure.
14
Installation and connection
