manualshive.com logo in svg

ASICS AH01, Instruction Manual

Share
Download
ASICS AH01 Instruction Manual Download Page 29

24

TO SET AND USE “3-CHANNEL ALARM”

ALARM MODE

●

 The alarm can be set to ring at three different times of a day.  The time zone can also be selected from those set in the TIME Mode.

■

 Alarm Time Setting

ALARM Mode

Alarm Setting Display

Press Button “E” 
to select desired 
alarm channel.

■

 Selection of Alarm Channel

・

 With each press of Button “E”, the alarm channel changes over in the following order.

・

 The alarm sounds differently from channel to channel.

・

 The alarm sound can be checked by pressing Button “D”.

■

 Engagement/Disengagement of Alarm

・

 With each press of Button”A”, the alarm is engaged and disengaged alternately.  The 

Alarm mark “

” is shown when the alarm is engaged.

・

 The alarm can be engaged or disengaged channel by channel.

・

 The Alarm mark is shown if alarm is engaged in any one of the alarm channels.

■

 To  Stop Alarm

・

 The alarm rings for 20 seconds at the designated time.

・

 To stop the alarm, press any of the buttons.

[Alarm engaged]

*  When the ALARM Mode appears, “ALARM” is shown in the upper row of the 

display for 1 second, and then, the Alarm Display appears.

Button “B”:

Returning to ALARM Mode

Button “C”:

Turning on backlight

Button “C”:

[Press for more than 2 seconds]
Returning display to

 

TIME Mode

Button “B

”

:

[Press for more than 2 seconds]
Activation of Alarm Setting
Display

Button “E”:

・

Selection of alarm channel

・

Selection of digits to be 
adjusted

Button “A”:

・

Engaging/disengaging 
alarm

・

Increasing digits to be

adjusted

Alarm mark

Alarm channel

Indication for
alarm engagement/
disengagement

Button “D”:

・

Checking alarm sound

・

Decreasing digits to be

adjusted

Press for
more than 
2 seconds.

Hour

Minute

Time zone

(T1/T2)

[1]

  Press Button “E” in the ALARM Mode to select the desired alarm channel.

[2]

  Keep Button “B” pressed for more than 2 seconds to activate the Alarm Setting 

Display.  The minute digits of the alarm time start flashing.

[3]

  Press Button “A” or “D” to set the flashing digits.

*  If Button “A” or “D” is kept pressed for more than 2 seconds, the digits move quickly.

[4]

  Press Button “E” to show the next digits to be adjusted (flashing).

[5]

 Repeat 

Steps 

[3]

 and 

[4]

 to set the digits in the order shown in the illustration at 

right.

[6]

  After all the adjustments are completed, press Button “B” to return to the ALARM 

Mode.  The alarm is automatically engaged, and the Alarm mark “

” is shown.

 

*  If the watch is left untouched in the Alarm Setting Display with the digits flashing, the display 

will automatically return to the ALARM Mode in 2 to 3 minutes.

*  Please note that the alarm rings according to the current time of the time 

zone you have selected (T1 or T2).   

Alarm mark

[Alarm disengaged]

AH01-WJ30WJ31̲英語版.ai   1   2013/02/24   21:35:28

Summary of Contents for AH01

































Reviews:

No comments

Brands by name

Popular brands

Load more brands