Getting started
4 / 49
helps you in recognizing the appliance or wall socket you are editing. To add 3rd party controllers,
click Add and choose the controller from the list. Then follow the instructions. (To see a list of
all compatible 3rd party controllers, visit www.asema.com)
5.
Remotes
If you have compatible remotes or remote switches, you can pair them with the Asema E. (see
www.asema.com for a list of compatible 3rd party components). Tap on “Detect” to scan them.
Then hold down a button on your remote to record the button press signal. The LEDs on your
Asema E will blink when it detects the signal from your remote. Follow the instructions on the
screen to confirm and save the remote. (for more extensive instructions, see: Section 6.2.4.
Remotes)
6.
Screenlets
Screenlets are applications that help you operate the device. The screenlet “ON/OFF” for in-
stance will help you control your appliances, while “Power Meter” will show your real-time elec-
tricity consumption. Your Asema E already has a set of preinstalled screenlets and you can
download and install more. Install a screenlet by selecting it on the list and then tap “Install”. N.B.
if your device is not connected to the Internet (step 3), you cannot install additional screenlets.
7.
Gestures
Gestures let you control the Asema E with hand movements. The way you use gestures depends
on how you install the Asema E. Select your installation type and the best fitting presets will
then be set up. You can change the settings afterwards.
8.
Finish
Click Finish and you are done! The Asema E will now automatically continue to the E-View mode.
Time to save some energy!
1.1.4. Using and switching between the E-view and Main
Setup
The Asema E is divided into two interfaces: E-view and Main Setup. You will switch between them,
depending on what you want to do with the device.
• E-view: This is the default interface. Here you run the screenlets to control your appliances, see
your electricity consumption, check the temperature etc.
At first boot, it should open in the Home screenlet, which is a screenlet menu, displaying the cur-
rently installed screenlets. Start a screenlet by clicking on the icon. Return to the Home screenlet
by clicking on the E-con centered in the top. If you are in the E-view you will always have the
E-icon at the top.
You can go to the Main Setup by going to the Home screenlet (click on the E-icon) and then
click on Main Setup at the bottom. Alternatively, you can click on the black status bar, which
will then unfold and click on "Enter Main Setup".
