Asema E User Manual Download Page 51 | Manualshive

Page: 51 / 54

background image

System setup

46 / 49

• Free Disk Space: the available disk space on the Asema E (only to be used by the system)

• Uptime: the time that your device has been running without a reboot

• Users: the user accounts for this device that are connected to Asema.com

• Device ID: this ID is used to register the device to our server system

6.6.12. System management

The Asema E system can be updated, backed up and restored.

• Check for updates: Asema regularly publishes updated versions of device software. Click on the

button to check for updates. If an update is found, a pop-up will appear, asking if you want
to install the updates. Press install. The Asema E will now automatically download the new
software, install it, and reboot the device. Depending on how old your current software is, and
how fast your Internet connection this might take a few (1-10) minutes ! Do not shut down
the device!

• Backup system: In case of serious problems with your device, or if you want to do a full re-

installation of the software, you can back up your system on an SD card. Simply put a microSD
card in the microSD card slot on the right side of the device. Then tap the "Backup System"
button and follow the steps.

• Restore backup: This option is used to restore a previously made backup of the system (see

previous item Backup system). Put the microSD in the microSD slot, push the "Restore Backup"
button and follow the steps.

• Remote management interface: remote management interface (RMI) allows Asema customer

support to access your Asema E remotely. By default the interface is closed and no access is
possible. When needed, you will be instructed by the customer support to open the interface.

6.6.13. Firewall

Firewall settings let you define how you want to get access to your home remotely through the
home firewall. For more information on firewall pass-through, please read Section 5.2, “Home
firewall”.

6.6.14. Privacy

An essential part of the design of the Asema E system is the connection to the Internet, and the
synchronization with our servers, where you can upload your consumption data and review your
historical consumption. The data will be stored anonymously on our server and treated with the
utmost possible care, in line with our strict Privacy Policy, which can be found on www.asema.com.
However, if you are concerned about your privacy, you can adjust the settings here.

• Allow data uploads: when checked, this allows your consumption data to be uploaded to the

asema.com service.

• Allow incoming messages: when checked, this allows Asema and, if offered your utility, to send

messages to your device about your consumption, electricity price or maintenance.

• Allow Home/Away status updates: when checked, this allows the Asema E to send information

about your Home/Away setting to asema.com service.

«
...
49
50
51
52
53
...
»

Summary of Contents for E























































Reviews:

No comments

Related manuals for E

Brand: ADT Pages: 2

Brand: Waterway Pages: 18

Brand: Elo TouchSystems Pages: 2

Brand: Maple Systems Pages: 2

Brand: Tipro Pages: 2

Brand: MINTRONIX Pages: 23

LDSBus BRT AN 080

Brand: Bridgetek Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands