System setup
30 / 49
Weather stations are sensors meant to measure temperature, humidity and wind strength inside
or near your house. Asema E currently supports recording temperatures from such sensors. You
can add up to three weather stations to your Asema E. This way you can record for instance
temperature outside your house and inside in a storage room to compare how changing weather
affects your heating system.
6.2.7.1. Pairing weather stations on the device
1. Go to Main Setup > Appliances > Weather Stations
2. Click on "Detect". This might take a while, depending on the transmission interval of the weather
station you are trying to connect. Once the device has been detected, it will be shown in a list,
saying "New Weather Station".
3. Fill in a name for the weather station. To edit further optional settings, click on the gear-icon. The
settings will be saved, once you navigate away from this page. The weather station will then
also automatically be added to the "Temperature" screenlet and other relevant applications.
6.2.7.2. Pairing weather stations in the WebView
1. Go to WebView > Appliances > Weather Stations.
2. Click "Detect". This might take a while, depending on the transmission interval of the weather
station you are trying to connect. Once the device has been detected, it will be shown in a list,
saying "New Weather Station".
3. Click on the gear-icon to edit the settings and pair the weather station. The settings will be
saved once you navigate away from this page. The weather station will then also automatically
be added to the "Temperature" screenlet and other relevant applications.
6.2.8. Central meter
In addition to measuring the electricity per appliance, the Asema E system can also measure the
total consumption of your home, using a central meter. Depending on your meter model, this can
be done through a direct integration with the meter from your utility company or with the Asema
M1 LED reader, or with the Asema M2 clamp meter. All methods are connected in the same way,
by following the steps below.
Note that your utility may require you to register your Asema E to their system if you use a meter
they provide. In such case Asema E will prompt you to do this. Follow the on-screen instructions
to make the registration.
6.2.8.1. Pairing a central meter on the device
1. Go to Main Setup > Appliances > Central Meter
2. Click on "Detect". The scanning might take a few moments.
3. Once a new central power meter is found, you will get a notification pop-up, identifying the
meter and asking if you want to use it. Press OK.
4. Fill in a name for the central meter, and other details if necessary.
5. Click on "Test" to test the connection. This will also prompt you to save the device. Press OK.
If you decide not to test, the central meter will be automatically saved, once you navigate away
from this page, by either going back to the Main Setup, or straight to the E-view.
