System setup
44 / 49
• Arrows switch screens: this disables all sweeping. In this setting sweeping does not activate
items, and navigation between pages in the E-view is done solely through arrows on the
touch screen.
• Sweeps switch screens: this allows sweeps to navigate between pages in the E-view
• Sweeps and arrows switch screens: this enables navigation between pages in the E-view
to be done by both sweeping and arrow buttons.
• Sweeps run actions: this enables sweeps to activate the assigned items (as stated above)
and automatically disables the navigation option for sweeping.
• Sweep speed: use the slider to set at which speed the sensors should detect your sweep-
ing. You can test the setting immediately by browsing up a little bit, and try to activate the
sweeping animation in the icon.
• Sweep tolerance: use the slider to set how accurate your sweeping movement needs to be.
You can test the setting immediately by browsing up a little bit, and try to activate the sweep-
ing animation in the icon.
•
Proximity sensor
:
Besides movement (sweeping), the proximity sensors also simply detect proximity. Since the
sensors are sensitive to ambient light and therefore affected by the conditions in the location
where you install the device. Consequently, there is no universal setting. We recommend you to
configure the settings to optimize the detection in your home.
• Preset: Choose a preset from the drop-down menu which best reflects the lighting situation
at your home. If you want to customize the setting, choose "No preset".
• Sensitivity: Use the slider to set how precise the sensors should be to detect proximity of
your hand. You can test the setting immediately.
• Detection distance: Use the slider to set the distance at which the sensor should detect the
proximity of your hand. You can test the setting immediately.
• Proximity and navigation tools: in the E-view two buttons are used for navigation: one the
bottom left there is a button that gives access to the the E-view menu and on the bottom
right there is a button to the in-screenlet page navigation. Proximity can be used to access
those buttons. Choose from the drop-down menu which setting you would like the proximity
sensors to have for this:
• Permanent icons: this will show permanently the buttons to access the menu.
• Proximity shows icons: the buttons will appear when you hold your hand either in front of
the left or the right sensor.
• Proximity shows menu: the menus will appear directly by holding your hand either in front
of the left or the right sensor.
• Hold time : Use the slider to determine how long you need to hold your hand in front of a sensor
before it detects it. You can test the setting immediately. The text "Menu Active" will appear
above the slider when it detects a hand.
6.6.7. Temperature Sensor
The Asema E contains an internal temperature sensor. In these settings you can calibrate it, so
that it is synchronized with your other temperature sensor. Simply put a + or - value in the field
to calibrate.
