Asema E User Manual Download Page 7 | Manualshive

Page: 7 / 54

background image

Getting started

2 / 49

1. Getting started

Thank you for choosing Asema E! You are now one step closer to creating a truly energy aware
home. This manual will tell you about all the features of your new system and will guide you through
the steps of installing and configuring it.

We've structured this manual so that those who just want to quickly get going can get the essential
information fast while those who want to tweak all details to fit their home perfectly can drill down
to all the nitty gritty. If you are in a hurry, this Chapter 1, Getting started will teach you all the
essentials.

Note that your Asema E offers you two ways to configure the system: The touchscreen of the
device and the WebView. The WebView is a web-browser interface you can use comfortably with
your PC or tablet computer. To use the WebView in configuration, please first complete the Get-
ting Started steps, then refer to Section 2.5, “WebView” for more information on how to use the
WebView.

1.1. Setting up the Asema E

1.1.1. Mounting the device on the table or the wall

Start of by unpacking the device and mounting it to the location of your choice. Locate the table
stand and the mounting rail in the box and decide where you want to put the Asema E in your
home. Depending on your choice, you have the option of wall mount or table stand.

Follow the instructions on the box on how to assemble the components. For table installation,
assemble the table stand (note: to attach the mounting rail to the bottom of the table stand, you
need to slide it in from the bottom). For wall installation, attach the mounting rail to a wall with
two screws. Then slide the Asema E to the mounting rail.

1.1.2. Connecting the power

Locate the USB power adapter in the box. Unwrap the while power cable and attach the USB-
A (large) connector to the adapter. Then insert the smaller micro-USB end of the cable to the
micro-USB socket on Asema E. Note that there are two micro-USB sockets on an Asema E; one

«
...
5
6
7
8
9
...
»

Summary of Contents for E























































Reviews:

No comments

Related manuals for E

Roger Touchscreen

Brand: Phonak Pages: 2

Scape Movable smo55-005

Brand: interactive scape Pages: 33

Brand: RGBlink Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands