30
If instead par. “St.P” = OFF and on par. “SSt” is programmed a value, at the switch on, the power calculated by the PID
controller is divided for the time “SSt”, with the meaning to calculate a ramp. The output power starts from 0 and is
progressively increased, basing on the calculated ramp, up to the reaching of time “SSt” or until when the power overcomes
the power calculated by the PID controller.
SSt
- SOFT START TIME (for PID control only): Duration time in hours and min. of the Soft-Start described on pa. “St.P”.
To disable the Soft-Start function it’s enough to program par. “Sst” = OFF.
