Ascon tecnologic KX6 Series, Engineering Manual

Page: 21 / 28

Ascon Tecnologic - KX6 - ENGINEERING MANUAL - Vr. 0.0
PAG. 21
Appendix A
]
inp group - main and auxiliary input configuration
no. param. description
dec.
point
values default
1 SEnS Input type 0
J = TC J (0... 1000°C/32... 1832°F);
crAL = TC K (0... 1370°C/32... 2498°F);
S = TC S (0... 1760°C/32... 3200°F);
r = TC R (0... 1760°C/32... 3200°F);
t = TC T (0... 400°C/32... 752°F);
0.20 = 0... 20 mA;
4.20 = 4... 20 mA.
J
2 dp Decimal Point Position (linear inputs) 0 0... 3 0
3 SSc Initial scale read-out for linear inputs dp -1999... 9999 0
4 FSc Full Scale Readout for linear inputs dp -1999... 9999 1000
5 unit Engineer unit °c/°F °C
6 Fil Digital filter on the measured value 1 0 (= OFF) - 0.1... 20.0 s 1.0
7 inE
Sensor error used to enable the safety output
value
or = Over range;
ou = Under range;
our = Over and under range.
our
8 oPE Safety output value (% of the output) -100... 100% 0
9 diF1 Digital Input 1 function
oFF = No function;
1 = Alarm reset;
2 = Alarm acknowledge (ACK);
3 = Hold of the measured value;
4 = Stand by mode;
5 = Manual mode;
6 = HEAt with SP1 and CooL with SP2;
7 = SP1 - SP2 selection.
oFF
10 diF2 Digital Input 2 function oFF
11 di.A
Digital Inputs Action
(DI2 only if configured)
0 = DI1 direct action, DI2 direct action;
1 = DI1 reverse action, DI2 direct action;
2 = DI1 direct action, DI2 reverse action;
3 = DI1 reverse action, DI2 reverse action.
0
]
out group
no. param. description
dec.
point
values default
12 o1t
Output 1 type
(when Out 1 is a linear output)
0-20 = 0... 20 mA;
4-20 = 4... 20 mA;
0-10 = 0... 10 V;
2-10 = 2... 10 V.
0-20
13 o1F
Out 1 function
(when Out 1 is a linear output)
NonE = Output not used;
H.rEG = Heating output;
c.rEG = Cooling output.
H.rEG
14 o2F
Out 2 function (when the instrument is
equipped with2 digital output)
NonE = Output not used;
H.rEG = Heating output;
c.rEG = Cooling output.
15 o3AL Alarms linked up with Out 3 0
0... 31:
+1 = Alarm 1;
+2 = Alarm 2;
+4 = Loop break alarm;
+8 = Sensor break;
+16 = Potentiometer break alarm.
AL2
16 o3Ac Out 3 action 0
dir = Direct action;
rEU = Reverse action;
dir.r = Direct with reversed LED;
ReU.r = Reverse with reversed LED.
dir
17 o4AL Alarms linked up with the out 4 0
0... 31:
+1 = Alarm 1;
+2 = Alarm 2;
+4 = Loop break alarm;
+8 = Sensor break;
+16 = Potentiometer break alarm.
AL1 +
AL2
18 o4Ac Out 4 action 0
dir = Direct action;
rEU = Reverse action;
dir.r = Direct with reversed LED;
ReU.r = Reverse with reversed LED.
dir