Personalizing Your Phone
20321625en_ba_a0
61
Function Commands
You can use function commands to define a function to suit your personal requirements. A function can
consist of one or more function commands, the function code and the phone number. You can either
carry out a function directly or store it under a key.
The following function commands are available (see "Entering letters and characters"):
Examples of how to define a function:
Functions are carried out depending on the current status. There are two possible states: "In a call" and
"Not in a call" (see Table "*/# Procedures").
Configuring the Operator Console
This section explains how to adapt the settings of the Operator Console to suit your personal require-
ments.
Note:
Your system administrator will determine whether your phone is registered as an Operator Con-
sole.
"A"
Seize line with highest priority
"I"
Seizes line
"X"
Disconnect
"P"
1 second pause before the next operation
"Lxx"
Seize line xx (Line keys)
"N"
Use the phone number entered in call preparation
"."
Control key function
"Z"
Activate/deactivate DTMF mode
"R"
Use the phone number last dialled
"IR"
Seize line ("I"),
dial phone number last dialled ("R")
"I201"
Seize line ("I") and dial phone number 201
"I*21201X"
Seize line ("I"),
activate call diversion ("*21") to phone number 201,
disconnect ("X")
Note
Text mode has to be activated before you can enter function commands.
All manuals and user guides at all-guides.com
all-guides.com
