TD 92816EN
17-July 2012 / Ver. B
14
Programming and Installation Manual
Care Phone
Analog Care Phone / GSM Care Phone can be programmed to wait 500 ms
before the phone is switched. Use
button when you enter the phone number
to enter a
W
.
The display of the hand terminal shows four rows such as:
There can be more rows in the menu that are not displayed. To switch between
the different choices in the menu use
and
on the hand terminal. The current
choice is marked with > and <. If, for example, you want to switch from A to C,
press the
button twice on the hand terminal.
4.1.2 Memory in the Hand Terminal
The Hand terminal has three different types of memory, where data is stored.
The different memory functions are described here, and image 6 below shows
how data is transferred between them.
Work area
- Contains the values that you work with when using the hand
terminal. You can obtain value from the Care Phone, or reset the area or any
preset parts of the work area. The values that are applicable in the work area are
the ones sent to the Care Phone.
Note:
If you make changes to the work area, but then quit the program without saving
these values in the preset area, they will be gone the next time you connect the hand
terminal.
The area
- This area always has a basic setting which is standard for all the hand
terminals and non-programmed Care Phones and as you can see in the image
you can never change the data in the reset area.
Preset area
- In the preset area you can find the data saved by yourself in the
Hand terminal. When you start the Hand terminal the values are retrieved from
the preset area 1. Each model of the Care Phone has seven own preset areas
where you can save different settings.
